YABS closes without completing

nikhm2n

Hi! I have a racknerd vps (1 core, 2 gb) and I have tried running yabs five times. The server closes connection before completing the benchmark.
I also tried saving the output to a file, but yabs seems to be terminating entirely.

How can I make sure that yabs gets completed?

wget -qO- yabs.sh | bash | tee yabs.txt

cybertech

reboot and try

tototo

screen

nikhm2n

I restarted the server and tried running yabs again. The ssh freezes after some time. This is the output for the second attempt:

wget -qO- yabs.sh | bash | tee yabs$(date +%d%b%Y).txt

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

Yet-Another-Bench-Script

v2024-06-09

https://github.com/masonr/yet-another-bench-script

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

Sun Aug 25 08:53:12 AM UTC 2024

Basic System Information:

Uptime : 0 days, 0 hours, 41 minutes
Processor : Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz
CPU cores : 1 @ 2999.998 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM : 1.9 GiB
Swap : 1024.0 MiB
Disk : 28.5 GiB
Distro : Ubuntu 22.04.4 LTS
Kernel : 5.15.0-119-generic
VM Type : KVM
IPv4/IPv6 : ✔ Online / ❌ Offline

IPv4 Network Information:

ISP : HostPapa
ASN : AS36352 HostPapa
Host : RackNerd LLC
Location : Elk Grove Village, Illinois (IL)
Country : United States

fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/vda2):

Block Size	4k (IOPS)	64k (IOPS)
Read	54.08 MB/s (13.5k)	711.44 MB/s (11.1k)
Write	54.20 MB/s (13.5k)	715.18 MB/s (11.1k)
Total	108.28 MB/s (27.0k)	1.42 GB/s (22.2k)
Block Size	512k (IOPS)	1m (IOPS)
------	--- ----	---- ----
Read	1.01 GB/s (1.9k)	965.54 MB/s (942)
Write	1.07 GB/s (2.0k)	1.02 GB/s (1.0k)
Total	2.09 GB/s (4.0k)	1.99 GB/s (1.9k)

iperf3 Network Speed Tests (IPv4):

Provider	Location (Link)	Send Speed	Recv Speed	Ping
Clouvider	London, UK (10G)	789 Mbits/sec	224 Mbits/sec	87.6 ms
Eranium	Amsterdam, NL (100G)	767 Mbits/sec	758 Mbits/sec	96.9 ms
Uztelecom	Tashkent, UZ (10G)	619 Mbits/sec	155 Mbits/sec	225 ms
Leaseweb	Singapore, SG (10G)	586 Mbits/sec	510 Mbits/sec	214 ms
Clouvider	Los Angeles, CA, US (10G)	866 Mbits/sec	335 Mbits/sec	47.9 ms
Leaseweb	NYC, NY, US (10G)	898 Mbits/sec	765 Mbits/sec	18.4 ms
Edgoo	Sao Paulo, BR (1G)	748 Mbits/sec	288 Mbits/sec	129 ms

Running GB6 benchmark test... cue elevator music

nikhm2n

@tototo said:
screen

Sorry, I didn't understand. Do I pass screen to yabs?

AuroraZero

@nikhm2n said:

@tototo said:
screen

Sorry, I didn't understand. Do I pass screen to yabs?

That is what he is saying to do but most likely the node is oversold and you are hitting the wall or there is someone abusing resources

JoeMerit

run 'screen', (install if necessary) and then run yabs inside of screen. if you get disconnected you can reconnect and re-attach to your screen and youll see the yabs results. I had a cloudcone and some other VMs that would disconnect me during yabs, but it would complete every time if i used screen.

I tended to not keep the VMs that would drop me during yabs without using screen.

dev_vps

@nikhm2n said:
Hi! I have a racknerd vps (1 core, 2 gb) and I have tried running yabs five times. The server closes connection before completing the benchmark.
I also tried saving the output to a file, but yabs seems to be terminating entirely.

How can I make sure that yabs gets completed?

wget -qO- yabs.sh | bash | tee yabs.txt

Run GB5 test instead of GB6

nikhm2n

I think the server was having some excessive use, too. The server was sluggish and the ping time was bad. My vps is currently being migrated to a new location. Fingers crossed that the new location isn't the same.
And, thank you for helping me.
I am going to have a look at screen and run some yabs on GB5.

hey

Run your command with -x, to get more details about what happens behind the scene

curl -sL yabs.sh | bash -x