Any Promox VM NAT dummy guide?

cybertechcybertech OGBenchmark King
in Technical

Haven't been able to get my NAT VMs to connect to internet.

Hoping to get pointed to a nice guide that you have.

Proxmox/Ubuntu/NAT dummy here :tongue:

I bench YABS 24/7/365 unless it's a leap year.

Comments

  • SagnikSSagnikS Hosting ProviderOG
    edited July 2020

    I just have a separate bridge for NAT VMs.

    auto vmbr1
iface vmbr1 inet static
    address <first_usable_internal_ip>/<netmask>
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    # Set up NAT for this bridge
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down iptables -t nat -D POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down echo 0 > /proc/sys/net/ipv4/ip_forward

    #Port Forwarding Rules
    iptables -t nat -A PREROUTING -p tcp --dport <port> -j DNAT --to-destination <internal_vm_ip>:<port>
    iptables -t nat -A POSTROUTING -p tcp --sport <port> -s <internal_vm_ip>: -j SNAT --to-source <public_ip>:<port>
    Thanked by (5)cybertech bdl Ouji AlwaysSkint Falzo
  • cybertechcybertech OGBenchmark King

    @SagnikS said:
    I just have a separate bridge for NAT VMs.

    auto vmbr1
iface vmbr1 inet static
    address <first_usable_internal_ip>/<netmask>
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    # Set up NAT for this bridge
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down iptables -t nat -D POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down echo 0 > /proc/sys/net/ipv4/ip_forward

    #Port Forwarding Rules
    iptables -t nat -A PREROUTING -p tcp --dport <port> -j DNAT --to-destination <internal_vm_ip>:<port>
    iptables -t nat -A POSTROUTING -p tcp --sport <port> -s <internal_vm_ip>: -j SNAT --to-source <public_ip>:<port>

    Anything else needed to be done on the NAT VM?

    I bench YABS 24/7/365 unless it's a leap year.

  • AaronSSAaronSS

    I just get a second IPv4 address, and give it to pfSense, and let it do NAT.

    Thanked by (1)cybertech
  • SagnikSSagnikS Hosting ProviderOG

    @cybertech said:

    @SagnikS said:
    I just have a separate bridge for NAT VMs.

    auto vmbr1
iface vmbr1 inet static
    address <first_usable_internal_ip>/<netmask>
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    # Set up NAT for this bridge
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down iptables -t nat -D POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down echo 0 > /proc/sys/net/ipv4/ip_forward

    #Port Forwarding Rules
    iptables -t nat -A PREROUTING -p tcp --dport <port> -j DNAT --to-destination <internal_vm_ip>:<port>
    iptables -t nat -A POSTROUTING -p tcp --sport <port> -s <internal_vm_ip>: -j SNAT --to-source <public_ip>:<port>

    Anything else needed to be done on the NAT VM?

    Just set the netmask and put in an IP from the internal subnet in the network config, and you should be golden.

    Thanked by (1)cybertech
  • SagnikSSagnikS Hosting ProviderOG

    @aaronstuder said:
    I just get a second IPv4 address, and give it to pfSense, and let it do NAT.

    That's what I do at home too (except the second IP).

  • cybertechcybertech OGBenchmark King

    @SagnikS said:

    @cybertech said:

    @SagnikS said:
    I just have a separate bridge for NAT VMs.

    auto vmbr1
iface vmbr1 inet static
    address <first_usable_internal_ip>/<netmask>
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    # Set up NAT for this bridge
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down iptables -t nat -D POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down echo 0 > /proc/sys/net/ipv4/ip_forward

    #Port Forwarding Rules
    iptables -t nat -A PREROUTING -p tcp --dport <port> -j DNAT --to-destination <internal_vm_ip>:<port>
    iptables -t nat -A POSTROUTING -p tcp --sport <port> -s <internal_vm_ip>: -j SNAT --to-source <public_ip>:<port>

    Anything else needed to be done on the NAT VM?

    Just set the netmask and put in an IP from the internal subnet in the network config, and you should be golden.

    I kinda did that too, just gonna try again heh. Thanks.

    I bench YABS 24/7/365 unless it's a leap year.

  • SagnikSSagnikS Hosting ProviderOG

    @cybertech said:

    @SagnikS said:

    @cybertech said:

    @SagnikS said:
    I just have a separate bridge for NAT VMs.

    auto vmbr1
iface vmbr1 inet static
    address <first_usable_internal_ip>/<netmask>
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    # Set up NAT for this bridge
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down iptables -t nat -D POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down echo 0 > /proc/sys/net/ipv4/ip_forward

    #Port Forwarding Rules
    iptables -t nat -A PREROUTING -p tcp --dport <port> -j DNAT --to-destination <internal_vm_ip>:<port>
    iptables -t nat -A POSTROUTING -p tcp --sport <port> -s <internal_vm_ip>: -j SNAT --to-source <public_ip>:<port>

    Anything else needed to be done on the NAT VM?

    Just set the netmask and put in an IP from the internal subnet in the network config, and you should be golden.

    I kinda did that too, just gonna try again heh. Thanks.

    If it didn't work, try pinging the IP that's assigned to the bridge.

  • cybertechcybertech OGBenchmark King

    @SagnikS said:

    @cybertech said:

    @SagnikS said:

    @cybertech said:

    @SagnikS said:
    I just have a separate bridge for NAT VMs.

    auto vmbr1
iface vmbr1 inet static
    address <first_usable_internal_ip>/<netmask>
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    # Set up NAT for this bridge
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down iptables -t nat -D POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down echo 0 > /proc/sys/net/ipv4/ip_forward

    #Port Forwarding Rules
    iptables -t nat -A PREROUTING -p tcp --dport <port> -j DNAT --to-destination <internal_vm_ip>:<port>
    iptables -t nat -A POSTROUTING -p tcp --sport <port> -s <internal_vm_ip>: -j SNAT --to-source <public_ip>:<port>

    Anything else needed to be done on the NAT VM?

    Just set the netmask and put in an IP from the internal subnet in the network config, and you should be golden.

    I kinda did that too, just gonna try again heh. Thanks.

    If it didn't work, try pinging the IP that's assigned to the bridge.

    ping internal IP from the host?

    I bench YABS 24/7/365 unless it's a leap year.

  • SagnikSSagnikS Hosting ProviderOG

    @cybertech said:

    @SagnikS said:

    @cybertech said:

    @SagnikS said:

    @cybertech said:

    @SagnikS said:
    I just have a separate bridge for NAT VMs.

    auto vmbr1
iface vmbr1 inet static
    address <first_usable_internal_ip>/<netmask>
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    # Set up NAT for this bridge
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down iptables -t nat -D POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down echo 0 > /proc/sys/net/ipv4/ip_forward

    #Port Forwarding Rules
    iptables -t nat -A PREROUTING -p tcp --dport <port> -j DNAT --to-destination <internal_vm_ip>:<port>
    iptables -t nat -A POSTROUTING -p tcp --sport <port> -s <internal_vm_ip>: -j SNAT --to-source <public_ip>:<port>

    Anything else needed to be done on the NAT VM?

    Just set the netmask and put in an IP from the internal subnet in the network config, and you should be golden.

    I kinda did that too, just gonna try again heh. Thanks.

    If it didn't work, try pinging the IP that's assigned to the bridge.

    ping internal IP from the host?

    Whoops, I mean, ping the IP from the VM. That same IP should also be the gateway for the network config inside the VM.

    Thanked by (1)cybertech
  • AaronSSAaronSS

    Who is the provider? What is the Server?

  • OujiOuji OG

    @cybertech's guide should cover it. That's all you need to do.

    Thanked by (1)cybertech
  • AbdullahAbdullah Hosting ProviderOG

    https://cyberpersons.com/2016/07/27/setup-nat-proxmox/

    Thanked by (3)cybertech AlwaysSkint jureve

    https://webhorizon.net

  • cybertechcybertech OGBenchmark King

    @SagnikS said:

    @cybertech said:

    @SagnikS said:
    I just have a separate bridge for NAT VMs.

    auto vmbr1
iface vmbr1 inet static
    address <first_usable_internal_ip>/<netmask>
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    # Set up NAT for this bridge
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down iptables -t nat -D POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down echo 0 > /proc/sys/net/ipv4/ip_forward

    #Port Forwarding Rules
    iptables -t nat -A PREROUTING -p tcp --dport <port> -j DNAT --to-destination <internal_vm_ip>:<port>
    iptables -t nat -A POSTROUTING -p tcp --sport <port> -s <internal_vm_ip>: -j SNAT --to-source <public_ip>:<port>

    Anything else needed to be done on the NAT VM?

    Just set the netmask and put in an IP from the internal subnet in the network config, and you should be golden.

    Thanks everyone for the guides, read all of them and could get my NAT VM to access internet.

    Now for accessing SSH NAT VM via port 1234 from outside, I'm stuck. is this correct?

    auto vmbr1
iface vmbr1 inet static
        address 192.168.1.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
        post-up echo 1 > /proc/sys/net/ipv4/ip_forward
        post-up iptables -t nat -A POSTROUTING -s '192.168.1.0/24' -o vmbr0 -j SNAT --to (my public IPv4)
        post-down iptables -t nat -D POSTROUTING -s '192.168.1.0/24' -o vmbr0 -j SNAT --to  (my public IPv4)
        post-down echo 0 > /proc/sys/net/ipv4/ip_forward
        iptables -t nat -A PREROUTING -p tcp --dport 1234 -j DNAT --to-destination 192.168.1.2:22
        iptables -t nat -A POSTROUTING -p tcp --sport 22 -s 192.168.1.2 -j SNAT --to-source  (my public IPv4):1234

    I bench YABS 24/7/365 unless it's a leap year.

  • AbdullahAbdullah Hosting ProviderOG

    in second-last line
    iptables -t nat -A PREROUTING -i vmbr1 -p tcp --dport 1234 -j DNAT --to 192.168.1.2:22
    can u try this?, you need to specify the interface I think.

    Thanked by (2)cybertech Ouji

    https://webhorizon.net

  • cybertechcybertech OGBenchmark King

    @Abdullah said:
    in second-last line
    iptables -t nat -A PREROUTING -i vmbr1 -p tcp --dport 1234 -j DNAT --to 192.168.1.2:22
    can u try this?, you need to specify the interface I think.

    Tried, does not seem to work.

    I bench YABS 24/7/365 unless it's a leap year.

  • NeoonNeoon OG

    @cybertech said:

    @Abdullah said:
    in second-last line
    iptables -t nat -A PREROUTING -i vmbr1 -p tcp --dport 1234 -j DNAT --to 192.168.1.2:22
    can u try this?, you need to specify the interface I think.

    Tried, does not seem to work.

    Main interface not the bridge.

    Thanked by (2)cybertech Abdullah

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • SagnikSSagnikS Hosting ProviderOG
    edited July 2020

    @cybertech said:

    @SagnikS said:

    @cybertech said:

    @SagnikS said:
    I just have a separate bridge for NAT VMs.

    auto vmbr1
iface vmbr1 inet static
    address <first_usable_internal_ip>/<netmask>
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    # Set up NAT for this bridge
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down iptables -t nat -D POSTROUTING -s '<first_internal_ip>/<netmask>' -o <public_if> -j SNAT --to <pubic_ip>
    post-down echo 0 > /proc/sys/net/ipv4/ip_forward

    #Port Forwarding Rules
    iptables -t nat -A PREROUTING -p tcp --dport <port> -j DNAT --to-destination <internal_vm_ip>:<port>
    iptables -t nat -A POSTROUTING -p tcp --sport <port> -s <internal_vm_ip>: -j SNAT --to-source <public_ip>:<port>

    Anything else needed to be done on the NAT VM?

    Just set the netmask and put in an IP from the internal subnet in the network config, and you should be golden.

    Thanks everyone for the guides, read all of them and could get my NAT VM to access internet.

    Now for accessing SSH NAT VM via port 1234 from outside, I'm stuck. is this correct?

    auto vmbr1
iface vmbr1 inet static
        address 192.168.1.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
        post-up echo 1 > /proc/sys/net/ipv4/ip_forward
        post-up iptables -t nat -A POSTROUTING -s '192.168.1.0/24' -o vmbr0 -j SNAT --to (my public IPv4)
        post-down iptables -t nat -D POSTROUTING -s '192.168.1.0/24' -o vmbr0 -j SNAT --to  (my public IPv4)
        post-down echo 0 > /proc/sys/net/ipv4/ip_forward
        iptables -t nat -A PREROUTING -p tcp --dport 1234 -j DNAT --to-destination 192.168.1.2:22
        iptables -t nat -A POSTROUTING -p tcp --sport 22 -s 192.168.1.2 -j SNAT --to-source  (my public IPv4):1234

    Try this:

     #Port Forwarding Rules
 iptables -t nat -A PREROUTING -p tcp --dport 1234 -j DNAT --to-destination 192.168.1.2:22
 iptables -t nat -A POSTROUTING -p tcp --sport 22 -s 192.168.1.2 -j SNAT --to-source <public_ip>:1234

    Whups, looks like you have the exact same config. It should just work, make sure that there's nothing blocking 1234 on the host.

    Thanked by (1)cybertech
  • cybertechcybertech OGBenchmark King

    After couple of tries finally got in! woohoo

    thanks all!

    Thanked by (2)Abdullah Ouji

    I bench YABS 24/7/365 unless it's a leap year.

  • OujiOuji OG

    @cybertech you can also use this guide as reference: https://mrpsycho.pl/cheatsheets/Proxmox-on-OVH-Kimsufi-behind-single-IP-NAT/

    It's pretty well written and that's how I did when I was running my Hetzner dedi.

    Thanked by (2)cybertech AlwaysSkint
  • cybertechcybertech OGBenchmark King

    @SagnikS said:
    Try this:

     #Port Forwarding Rules
 iptables -t nat -A PREROUTING -p tcp --dport 1234 -j DNAT --to-destination 192.168.1.2:22
 iptables -t nat -A POSTROUTING -p tcp --sport 22 -s 192.168.1.2 -j SNAT --to-source <public_ip>:1234

    Whups, looks like you have the exact same config. It should just work, make sure that there's nothing blocking 1234 on the host.

    This worked for me, does it do the same thing?

    post-up iptables -t nat -A PREROUTING -i vmbr0 -p tcp --dport 9584 -j DNAT --to 192.168.1.2:22
post-down iptables -t nat -D PREROUTING -i vmbr0 -p tcp --dport 9584 -j DNAT --to 192.168.1.2:22

    I bench YABS 24/7/365 unless it's a leap year.

  • cybertechcybertech OGBenchmark King

    @Ouji said:
    @cybertech you can also use this guide as reference: https://mrpsycho.pl/cheatsheets/Proxmox-on-OVH-Kimsufi-behind-single-IP-NAT/

    It's pretty well written and that's how I did when I was running my Hetzner dedi.

    it does look complete, gonna boobmark it

    I bench YABS 24/7/365 unless it's a leap year.

  • MrPsychoMrPsycho OG
    edited July 2020

    @Ouji said: https://mrpsycho.pl/cheatsheets/Proxmox-on-OVH-Kimsufi-behind-single-IP-NAT/

    Oh, hi

    @cybertech said: it does look complete, gonna boobmark it

    Thank you.

    @cybertech said: This worked for me, does it do the same thing?

    Lines starting with post-up/down should be placed inside /etc/network/interfaces. They indicate what command is going to be executed when interface is brought up/down; -A means add, -D means delete. As for the POSTROUTING - I'm not sure how would it be useful.

    E: You will want to execute what's past post-up to apply the rule immediately (as described in the tutorial).

    Thanked by (1)cybertech
  • OujiOuji OG

    @MrPsycho said: Oh, hi

    Hey hey. Thanks for the write-up, it really helped me a lot and I always link it when someone asks for NAT setup in Proxmox, I hope you don't mind.

    Thanked by (1)MrPsycho
  • AbdullahAbdullah Hosting ProviderOG

    Hey hi, anyone can point me to a guide on adding IPv6 to openvz containers. I tried many approaches but I suspect firewalld messes with ipv6. Anyone can share their experience?

    https://webhorizon.net

  • bdlbdl OG
    edited July 2020

    Does anyone have any opinions on using ufw on the proxmox host vs using the built in firewall (for host protection)? I'm using ufw at the moment but it's a little clunky so considering switching to use the built in firewall. Either that or grabbing a second IP and using virtualised pfsense...

  • AlwaysSkintAlwaysSkint OG
    edited July 2020

    UFW - yuk! Thought that was only a Ubuntu thing (plus Linux Mint desktop.)
    CSF. ;)

    Thanked by (1)bdl

    It wisnae me! A big boy done it and ran away.
    NVMe2G for life! until death (the end is nigh)

  • bdlbdl OG
    edited July 2020

    @AlwaysSkint said:
    UFW - yuk! Thought that was only a Ubuntu thing (plus Linux Mint desktop.)
    CSF. ;)

    force of habit with Ubuntu boxen I was stuck using. Ended up just rebuilding and using the Proxmox built in fw and all is good in the pve world :)

    Thanked by (1)AlwaysSkint
  • NeoonNeoon OG

    https://github.com/Ne00n/NanoKVM-Tools

    Thanked by (2)bdl Abdullah

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

Sign In or Register to comment.

© LowEndSpirit 2024

ipv6 ready