HostSailor - 12.12 Mega Deal: Get Your KVM VPS NVMe at 90% Recurring Discount – Forever!

124

Comments

  • edited December 13

    Answer from support about rDNS/PTR:
    As of now, rDNS setup is not available, it will be ready in a few days and you will be able to do it from the VPS control panel once ready.

    Thanked by (2)rm_ cmeerw
  • It's over: The promotion code entered has expired

  • @jcn50 said:
    Answer from support about rDNS/PTR:
    As of now, rDNS setup is not available, it will be ready in a few days and you will be able to do it from the VPS control panel once ready.

    Why do you need rDNS? Email is blocked.

    Thanked by (1)yoursunny
  • edited December 13

    @Fritz said: Why do you need rDNS? Email is blocked.

    Outgoing TCP port 25 is working fine for me~

  • @jcn50 said:

    @Fritz said: Why do you need rDNS? Email is blocked.

    Outgoing TCP ***** is working fine for me~

    Ssshhhhh ;)

    Thanked by (1)jcn50
  • @rm_ said:
    The network is still bad. It was perfect at first, but now 15-30% packet loss for over 5 hours.

    Now 24 hours. My ping-based uptime monitors give uptime as around 70%. Put bluntly, network sucks.

    Thanked by (1)yoursunny
  • @tetech said:

    @rm_ said:
    The network is still bad. It was perfect at first, but now 15-30% packet loss for over 5 hours.

    Now 24 hours. My ping-based uptime monitors give uptime as around 70%. Put bluntly, network sucks.

    On mine it is mostly good by now.

    Nevermind the higher latency part in the middle, that specific one was due to my ISP.
    But the blue and purple line which was packet loss due to this provider DC or node, has returned to green even before that.

  • @rm_ said:
    On mine it is mostly good by now.

    That ping is smoky B)

    P.S.
    I believe it's also worth mentioning the node, as the situation differs among the fleet.

    StorageAMD EPYC VDS (ref) up to 4TB NVMe & 10TB SAN disk / Big HDD VPS (ref) from $2.42/mth/TB

  • @rm_ said:

    @tetech said:

    @rm_ said:
    The network is still bad. It was perfect at first, but now 15-30% packet loss for over 5 hours.

    Now 24 hours. My ping-based uptime monitors give uptime as around 70%. Put bluntly, network sucks.

    On mine it is mostly good by now.

    Nevermind the higher latency part in the middle, that specific one was due to my ISP.
    But the blue and purple line which was packet loss due to this provider DC or node, has returned to green even before that.

  • code expired :(

  • ZizzyDizzyMCZizzyDizzyMC Hosting Provider

    @tetech said:

    @rm_ said:

    @tetech said:

    @rm_ said:
    The network is still bad. It was perfect at first, but now 15-30% packet loss for over 5 hours.

    Now 24 hours. My ping-based uptime monitors give uptime as around 70%. Put bluntly, network sucks.

    On mine it is mostly good by now.

    Nevermind the higher latency part in the middle, that specific one was due to my ISP.
    But the blue and purple line which was packet loss due to this provider DC or node, has returned to green even before that.

    We hitting 4 8s with this one.

    Thanked by (1)user123
  • I have the same problem with the response time on mine: going up & down.. Can something be down about this? Shall I open a ticket?

  • seems better than me, got no traffic out or in. Can only use vnc to login. Cant even ping dns server. Even reinstall from centos 9 to debian 12. I'm open ticket cause didnt know other solution.

  • @rizkiv1 are you on node #6?

    Thanked by (1)rizkiv1
  • @jcn50 said:
    @rizkiv1 are you on node #6?

    Many are on the infamous node #6.

    Thanked by (1)rizkiv1

    Stop the planet! I wish to get off!

  • Don't know how to tell the node that I'm on. But here is my YABS ("Sailor" product):

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    #              Yet-Another-Bench-Script              #
    #                     v2024-06-09                    #
    # https://github.com/masonr/yet-another-bench-script #
    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    
    Sat 14 Dec 22:32:32 GMT 2024
    
    Basic System Information:
    ---------------------------------
    Uptime     : 0 days, 0 hours, 2 minutes
    Processor  : QEMU Virtual CPU version 2.5+
    CPU cores  : 2 @ 2449.996 MHz
    AES-NI     : ❌ Disabled
    VM-x/AMD-V : ❌ Disabled
    RAM        : 1.9 GiB
    Swap       : 2.0 GiB
    Disk       : 47.1 GiB
    Distro     : Debian GNU/Linux 12 (bookworm)
    Kernel     : 6.1.0-28-amd64
    VM Type    : KVM
    IPv4/IPv6  : ✔ Online / ❌ Offline
    
    IPv4 Network Information:
    ---------------------------------
    ISP        : HostSailor
    ASN        : AS60117 Host Sailor Ltd
    Host       : HostSailor RO Services
    Location   : Bucharest, București (B)
    Country    : Romania
    
    fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/vda1):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 240.62 MB/s  (60.1k) | 486.76 MB/s   (7.6k)
    Write      | 241.25 MB/s  (60.3k) | 489.33 MB/s   (7.6k)
    Total      | 481.88 MB/s (120.4k) | 976.10 MB/s  (15.2k)
               |                      |                     
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 556.33 MB/s   (1.0k) | 612.23 MB/s    (597)
    Write      | 585.89 MB/s   (1.1k) | 653.01 MB/s    (637)
    Total      | 1.14 GB/s     (2.2k) | 1.26 GB/s     (1.2k)
    
    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
    -----           | -----                     | ----            | ----            | ----           
    Clouvider       | London, UK (10G)          | 799 Mbits/sec   | 2.23 Gbits/sec  | 9.33 ms        
    Eranium         | Amsterdam, NL (100G)      | 936 Mbits/sec   | 2.68 Gbits/sec  | 0.655 ms       
    Uztelecom       | Tashkent, UZ (10G)        | 875 Mbits/sec   | 733 Mbits/sec   | 90.1 ms        
    Leaseweb        | Singapore, SG (10G)       | 465 Mbits/sec   | 964 Mbits/sec   | 177 ms         
    Clouvider       | Los Angeles, CA, US (10G) | 771 Mbits/sec   | 251 Mbits/sec   | 137 ms         
    Leaseweb        | NYC, NY, US (10G)         | 785 Mbits/sec   | 760 Mbits/sec   | 76.7 ms        
    Edgoo           | Sao Paulo, BR (1G)        | 755 Mbits/sec   | 547 Mbits/sec   | 186 ms         
    
    Geekbench 6 Benchmark Test:
    ---------------------------------
    Test            | Value                         
                    |                               
    Single Core     | 853                           
    Multi Core      | 1569                          
    Full Test       | https://browser.geekbench.com/v6/cpu/9429585
    
    YABS completed in 14 min 21 sec
    
  • edited December 15

    @SocksAreComfortable you need to look into SolusVM: https://vps.hostsailor.com then once you open your server look for the the "Node" row~

  • @SocksAreComfortable said:
    Don't know how to tell the node that I'm on. But here is my YABS ("Sailor" product):

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    #              Yet-Another-Bench-Script              #
    #                     v2024-06-09                    #
    # https://github.com/masonr/yet-another-bench-script #
    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    
    Sat 14 Dec 22:32:32 GMT 2024
    
    Basic System Information:
    ---------------------------------
    Uptime     : 0 days, 0 hours, 2 minutes
    Processor  : QEMU Virtual CPU version 2.5+
    CPU cores  : 2 @ 2449.996 MHz
    AES-NI     : ❌ Disabled
    VM-x/AMD-V : ❌ Disabled
    RAM        : 1.9 GiB
    Swap       : 2.0 GiB
    Disk       : 47.1 GiB
    Distro     : Debian GNU/Linux 12 (bookworm)
    Kernel     : 6.1.0-28-amd64
    VM Type    : KVM
    IPv4/IPv6  : ✔ Online / ❌ Offline
    
    IPv4 Network Information:
    ---------------------------------
    ISP        : HostSailor
    ASN        : AS60117 Host Sailor Ltd
    Host       : HostSailor RO Services
    Location   : Bucharest, București (B)
    Country    : Romania
    
    fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/vda1):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 240.62 MB/s  (60.1k) | 486.76 MB/s   (7.6k)
    Write      | 241.25 MB/s  (60.3k) | 489.33 MB/s   (7.6k)
    Total      | 481.88 MB/s (120.4k) | 976.10 MB/s  (15.2k)
               |                      |                     
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 556.33 MB/s   (1.0k) | 612.23 MB/s    (597)
    Write      | 585.89 MB/s   (1.1k) | 653.01 MB/s    (637)
    Total      | 1.14 GB/s     (2.2k) | 1.26 GB/s     (1.2k)
    
    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
    -----           | -----                     | ----            | ----            | ----           
    Clouvider       | London, UK (10G)          | 799 Mbits/sec   | 2.23 Gbits/sec  | 9.33 ms        
    Eranium         | Amsterdam, NL (100G)      | 936 Mbits/sec   | 2.68 Gbits/sec  | 0.655 ms       
    Uztelecom       | Tashkent, UZ (10G)        | 875 Mbits/sec   | 733 Mbits/sec   | 90.1 ms        
    Leaseweb        | Singapore, SG (10G)       | 465 Mbits/sec   | 964 Mbits/sec   | 177 ms         
    Clouvider       | Los Angeles, CA, US (10G) | 771 Mbits/sec   | 251 Mbits/sec   | 137 ms         
    Leaseweb        | NYC, NY, US (10G)         | 785 Mbits/sec   | 760 Mbits/sec   | 76.7 ms        
    Edgoo           | Sao Paulo, BR (1G)        | 755 Mbits/sec   | 547 Mbits/sec   | 186 ms         
    
    Geekbench 6 Benchmark Test:
    ---------------------------------
    Test            | Value                         
                    |                               
    Single Core     | 853                           
    Multi Core      | 1569                          
    Full Test       | https://browser.geekbench.com/v6/cpu/9429585
    
    YABS completed in 14 min 21 sec
    

    You should do the trick to enable CPU passthrough and nested virtualization. Install Almalinux 9, then run YABS to verify, then you can reinstall Debian 12

    Here's my YABS on node 6

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    #              Yet-Another-Bench-Script              #
    #                     v2024-06-09                    #
    # https://github.com/masonr/yet-another-bench-script #
    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    
    Sat Dec 14 19:34:10 EST 2024
    
    Basic System Information:
    ---------------------------------
    Uptime     : 1 days, 18 hours, 0 minutes
    Processor  : AMD EPYC 9534 64-Core Processor
    CPU cores  : 4 @ 2449.996 MHz
    AES-NI     : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM        : 3.8 GiB
    Swap       : 4.0 GiB
    Disk       : 74.7 GiB
    Distro     : AlmaLinux 9.5 (Teal Serval)
    Kernel     : 5.14.0-503.15.1.el9_5.x86_64
    VM Type    : KVM
    IPv4/IPv6  : ✔ Online / ❌ Offline
    
    IPv4 Network Information:
    ---------------------------------
    ISP        : Host Sailor Ltd
    ASN        : AS60117 Host Sailor Ltd
    Host       : Host Sailor Ltd
    Location   : Amsterdam, North Holland (NH)
    Country    : The Netherlands
    
    fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/vda1):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 201.11 MB/s  (50.2k) | 310.28 MB/s   (4.8k)
    Write      | 201.64 MB/s  (50.4k) | 311.92 MB/s   (4.8k)
    Total      | 402.75 MB/s (100.6k) | 622.20 MB/s   (9.7k)
               |                      |                     
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 441.22 MB/s    (861) | 582.70 MB/s    (569)
    Write      | 464.67 MB/s    (907) | 621.51 MB/s    (606)
    Total      | 905.89 MB/s   (1.7k) | 1.20 GB/s     (1.1k)
    
    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
    -----           | -----                     | ----            | ----            | ----           
    Clouvider       | London, UK (10G)          | 1.46 Gbits/sec  | 2.58 Gbits/sec  | 9.55 ms        
    Eranium         | Amsterdam, NL (100G)      | 1.56 Gbits/sec  | 2.84 Gbits/sec  | 0.560 ms       
    Uztelecom       | Tashkent, UZ (10G)        | busy            | 1.07 Gbits/sec  | 85.6 ms        
    Leaseweb        | Singapore, SG (10G)       | 943 Mbits/sec   | 1.35 Gbits/sec  | 180 ms         
    Clouvider       | Los Angeles, CA, US (10G) | 1.18 Gbits/sec  | 741 Mbits/sec   | 144 ms         
    Leaseweb        | NYC, NY, US (10G)         | 1.41 Gbits/sec  | 2.12 Gbits/sec  | 75.5 ms        
    Edgoo           | Sao Paulo, BR (1G)        | 936 Mbits/sec   | 784 Mbits/sec   | 185 ms         
    
    Geekbench 6 Benchmark Test:
    ---------------------------------
    Test            | Value                         
                    |                               
    Single Core     | 1875                          
    Multi Core      | 5608                          
    Full Test       | https://browser.geekbench.com/v6/cpu/9430852
    
    YABS completed in 10 min 5 sec
    
    Thanked by (1)SocksAreComfortable

    Best and friendliest hosts Host-C , Hostbrr aff.

  • @jcn50 said:
    @SocksAreComfortable you need to look into SolusVM: https://vps.hostsailor.com then once you open your server look for the the "Node" row~

    Ah, seems I'm on node 4 then! kvmnvme04.hostsailor.com

  • edited December 15

    @curiouswanderer said:

    You should do the trick to enable CPU passthrough and nested virtualization. Install Almalinux 9, then run YABS to verify, then you can reinstall Debian 12

    Thank you, didn't know that trick! Never installed Alma so didn't know what I was doing when I loaded into it, but when I re-installed Debian it seems to have worked:

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    #              Yet-Another-Bench-Script              #
    #                     v2024-06-09                    #
    # https://github.com/masonr/yet-another-bench-script #
    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    
    Sun 15 Dec 01:04:20 GMT 2024
    
    Basic System Information:
    ---------------------------------
    Uptime     : 0 days, 0 hours, 1 minutes
    Processor  : AMD EPYC 9534 64-Core Processor
    CPU cores  : 2 @ 2449.996 MHz
    AES-NI     : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM        : 1.9 GiB
    Swap       : 2.0 GiB
    Disk       : 47.1 GiB
    Distro     : Debian GNU/Linux 12 (bookworm)
    Kernel     : 6.1.0-28-amd64
    VM Type    : KVM
    IPv4/IPv6  : ✔ Online / ❌ Offline
    
    IPv4 Network Information:
    ---------------------------------
    ISP        : HostSailor
    ASN        : AS60117 Host Sailor Ltd
    Host       : HostSailor RO Services
    Location   : Bucharest, București (B)
    Country    : Romania
    
    fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/vda1):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 224.19 MB/s  (56.0k) | 495.18 MB/s   (7.7k)
    Write      | 224.78 MB/s  (56.1k) | 497.78 MB/s   (7.7k)
    Total      | 448.97 MB/s (112.2k) | 992.96 MB/s  (15.5k)
               |                      |                     
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 594.20 MB/s   (1.1k) | 655.96 MB/s    (640)
    Write      | 625.77 MB/s   (1.2k) | 699.65 MB/s    (683)
    Total      | 1.21 GB/s     (2.3k) | 1.35 GB/s     (1.3k)
    
    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
    -----           | -----                     | ----            | ----            | ----           
    Clouvider       | London, UK (10G)          | 755 Mbits/sec   | 2.12 Gbits/sec  | 9.22 ms        
    Eranium         | Amsterdam, NL (100G)      | 890 Mbits/sec   | 2.51 Gbits/sec  | 0.564 ms       
    Uztelecom       | Tashkent, UZ (10G)        | 827 Mbits/sec   | 800 Mbits/sec   | 89.3 ms        
    Leaseweb        | Singapore, SG (10G)       | 696 Mbits/sec   | 960 Mbits/sec   | 185 ms         
    Clouvider       | Los Angeles, CA, US (10G) | 712 Mbits/sec   | 525 Mbits/sec   | 136 ms         
    Leaseweb        | NYC, NY, US (10G)         | 794 Mbits/sec   | 1.11 Gbits/sec  | 75.2 ms        
    Edgoo           | Sao Paulo, BR (1G)        | 677 Mbits/sec   | 548 Mbits/sec   | 186 ms         
    
    Geekbench 6 Benchmark Test:
    ---------------------------------
    Test            | Value                         
                    |                               
    Single Core     | 1676                          
    Multi Core      | 3263                          
    Full Test       | https://browser.geekbench.com/v6/cpu/9431162
    
    YABS completed in 10 min 21 sec
    
  • cybertechcybertech OGBenchmark King

    @SocksAreComfortable change network to Virtio in solusvm

    Thanked by (1)SocksAreComfortable

    I bench YABS 24/7/365 unless it's a leap year.

  • @cybertech said:
    @SocksAreComfortable change network to Virtio in solusvm

    Done and rebooted. Not entirely sure why, but given the benefits from the last change, I'll take it whatever it does, lol.

  • cybertechcybertech OGBenchmark King

    @SocksAreComfortable said:

    @cybertech said:
    @SocksAreComfortable change network to Virtio in solusvm

    Done and rebooted. Not entirely sure why, but given the benefits from the last change, I'll take it whatever it does, lol.

    try iperf test again

    Thanked by (1)SocksAreComfortable

    I bench YABS 24/7/365 unless it's a leap year.

  • @cybertech said:

    @SocksAreComfortable said:

    @cybertech said:
    @SocksAreComfortable change network to Virtio in solusvm

    Done and rebooted. Not entirely sure why, but given the benefits from the last change, I'll take it whatever it does, lol.

    try iperf test again

    Had a feeling that might be relevant, so I had one running.

    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
    -----           | -----                     | ----            | ----            | ----           
    Clouvider       | London, UK (10G)          | 8.35 Gbits/sec  | 5.92 Gbits/sec  | 20.4 ms        
    Eranium         | Amsterdam, NL (100G)      | 9.08 Gbits/sec  | 8.83 Gbits/sec  | 0.589 ms       
    Uztelecom       | Tashkent, UZ (10G)        | 2.24 Gbits/sec  | 2.02 Gbits/sec  | 89.2 ms        
    Leaseweb        | Singapore, SG (10G)       | 876 Mbits/sec   | 954 Mbits/sec   | 182 ms         
    Clouvider       | Los Angeles, CA, US (10G) | 1.23 Gbits/sec  | 659 Mbits/sec   | 136 ms         
    Leaseweb        | NYC, NY, US (10G)         | 2.03 Gbits/sec  | 2.39 Gbits/sec  | 75.1 ms        
    Edgoo           | Sao Paulo, BR (1G)        | 948 Mbits/sec   | 925 Mbits/sec   | 186 ms   
    

    Tiny bit faster on some of those, lol. Just a smidge.

  • Does Almalinux trick is legal for us to do @hostsailor

    Myself has used it as well but will redo if it's not allowed.

  • @Fritz said:
    Does Almalinux trick is legal for us to do @hostsailor

    Myself has used it as well but will redo if it's not allowed.

    I'm sorry, what?

    Thanked by (1)TrendyJack
  • @jcn50 said:
    @rizkiv1 are you on node #6?

    Sadly yes. Well, after that post the network up and normal till now lol. Yet to test and maybe not running yabs.

  • vyasvyas OGSenpai
    edited December 15

    Is this Hostsailor offer the new (temporary hopefully) c1v ?

  • @vyas said:
    Is this Hostsailor offer the new (temporary hopefully) c1v ?

    More like coicu

  • @Fritz said:
    Does Almalinux trick is legal for us to do @hostsailor

    Myself has used it as well but will redo if it's not allowed.

    Redo how? And what exactly?
    It's just a simple OS reinstall from the template via the control panel. It's not like you did anything illegal...

Sign In or Register to comment.