bashvm - CLI VM Manager - bashvm.com

babywhalebabywhale
in General

Hello everyone,

I’m very excited to present everyone bashvm, I have been working on for some time and I wanted to get more exposure on the project.

bashvm is basically a bash script that can manage virtual machines with only ssh access required, In result it has very little overhead and reduces the attack surface for the hypervisor since it is just a bash script.

More details can be found on https://bashvm.com

Screenshots: https://bashvm.com/screenshots.html
Guide: https://bashvm.com/guide.html
Github: https://github.com/babywhale321/bashvm

Here is an example of creating a new vm using the automate option


bashvm has many features and many more to come so all comments or suggestion are welcomed.

Get a free VPS! - freevps.org

Thanked by (7)_MS_ sh97 crunchbits AlwaysSkint tototo daffy ElonBezos

Comments

  • yoursunnyyoursunny OG

    any bench?

    Thanked by (1)Not_Oles

    HostBrr aff best VPS; VirmAche aff worst VPS.
    Unable to push-up due to shoulder injury 😣

  • sh97sh97

    @yoursunny said:
    any bench?

    https://lowendspirit.com/discussion/comment/171849/#Comment_171849

    Thanked by (3)babywhale Not_Oles yoursunny

    The Ultimate Speedtest Script | Get Instant Alerts on new LES/LET deals | Cheap VPS Deals
    FREE KVM VPS - FreeVPS.org | FREE LXC VPS - MicroLXC

  • Not_OlesNot_Oles Hosting ProviderContent Writer

    @yoursunny said:
    any bench?

    Node

    root@zombie ~ # curl -sL yabs.sh | bash
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
#              Yet-Another-Bench-Script              #
#                     v2024-01-01                    #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Sat Mar  2 04:34:52 AM UTC 2024

Basic System Information:
---------------------------------
Uptime     : 0 days, 2 hours, 51 minutes
Processor  : Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz
CPU cores  : 8 @ 3600.000 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM        : 62.6 GiB
Swap       : 32.0 GiB
Disk       : 436.7 GiB
Distro     : Ubuntu 22.04.4 LTS
Kernel     : 5.15.0-89-generic
VM Type    : NONE
IPv4/IPv6  : ✔ Online / ✔ Online

IPv6 Network Information:
---------------------------------
ISP        : Redacted Online GmbH
ASN        : AS24940 Redacted Online GmbH
Location   : Falkenstein, Saxony (SN)
Country    : Germany

fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/md2):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 489.57 MB/s (122.3k) | 782.80 MB/s  (12.2k)
Write      | 490.86 MB/s (122.7k) | 786.92 MB/s  (12.2k)
Total      | 980.43 MB/s (245.1k) | 1.56 GB/s    (24.5k)
           |                      |                     
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 805.23 MB/s   (1.5k) | 865.85 MB/s    (845)
Write      | 848.01 MB/s   (1.6k) | 923.52 MB/s    (901)
Total      | 1.65 GB/s     (3.2k) | 1.78 GB/s     (1.7k)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
-----           | -----                     | ----            | ----            | ----           
Clouvider       | London, UK (10G)          | 921 Mbits/sec   | 829 Mbits/sec   | 24.4 ms        
Scaleway        | Paris, FR (10G)           | 923 Mbits/sec   | 929 Mbits/sec   | 21.1 ms        
NovoServe       | North Holland, NL (40G)   | busy            | 935 Mbits/sec   | 10.8 ms        
Uztelecom       | Tashkent, UZ (10G)        | 877 Mbits/sec   | 432 Mbits/sec   | 90.3 ms        
Clouvider       | NYC, NY, US (10G)         | 867 Mbits/sec   | 555 Mbits/sec   | 85.2 ms        
Clouvider       | Dallas, TX, US (10G)      | 839 Mbits/sec   | 349 Mbits/sec   | 120 ms         
Clouvider       | Los Angeles, CA, US (10G) | 808 Mbits/sec   | 396 Mbits/sec   | 150 ms         

iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
-----           | -----                     | ----            | ----            | ----           
Clouvider       | London, UK (10G)          | 909 Mbits/sec   | 918 Mbits/sec   | 24.4 ms        
Scaleway        | Paris, FR (10G)           | busy            | busy            | 21.5 ms        
NovoServe       | North Holland, NL (40G)   | 918 Mbits/sec   | 923 Mbits/sec   | 10.8 ms        
Uztelecom       | Tashkent, UZ (10G)        | 867 Mbits/sec   | 604 Mbits/sec   | 90.2 ms        
Clouvider       | NYC, NY, US (10G)         | 858 Mbits/sec   | 511 Mbits/sec   | 85.0 ms        
Clouvider       | Dallas, TX, US (10G)      | 824 Mbits/sec   | 454 Mbits/sec   | 120 ms         
Clouvider       | Los Angeles, CA, US (10G) | 797 Mbits/sec   | 402 Mbits/sec   | 150 ms         

Geekbench 6 Benchmark Test:
---------------------------------
Test            | Value                         
                |                               
Single Core     | 1403                          
Multi Core      | 4575                          
Full Test       | https://browser.geekbench.com/v6/cpu/5138179

YABS completed in 12 min 59 sec
root@zombie ~ #

    VM Made with bashvm

    root@vm1-zombie:~# curl -sL yabs.sh | bash
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
#              Yet-Another-Bench-Script              #
#                     v2024-01-01                    #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Fri Mar  1 11:18:33 PM EST 2024

Basic System Information:
---------------------------------
Uptime     : 0 days, 1 hours, 53 minutes
Processor  : Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz
CPU cores  : 4 @ 3599.998 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM        : 3.8 GiB
Swap       : 976.0 MiB
Disk       : 90.2 GiB
Distro     : Debian GNU/Linux 12 (bookworm)
Kernel     : 6.1.0-18-amd64
VM Type    : KVM
IPv4/IPv6  : ✔ Online / ✔ Online

IPv6 Network Information:
---------------------------------
ISP        : Redacted Online GmbH
ASN        : AS24940 Redacted Online GmbH
Location   : Falkenstein, Saxony (SN)
Country    : Germany

fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/vda1):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 246.89 MB/s  (61.7k) | 791.99 MB/s  (12.3k)
Write      | 247.54 MB/s  (61.8k) | 796.15 MB/s  (12.4k)
Total      | 494.43 MB/s (123.6k) | 1.58 GB/s    (24.8k)
           |                      |                     
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 863.79 MB/s   (1.6k) | 903.63 MB/s    (882)
Write      | 909.69 MB/s   (1.7k) | 963.81 MB/s    (941)
Total      | 1.77 GB/s     (3.4k) | 1.86 GB/s     (1.8k)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
-----           | -----                     | ----            | ----            | ----           
Clouvider       | London, UK (10G)          | 921 Mbits/sec   | 932 Mbits/sec   | 24.7 ms        
Scaleway        | Paris, FR (10G)           | busy            | busy            | 21.3 ms        
NovoServe       | North Holland, NL (40G)   | 923 Mbits/sec   | 935 Mbits/sec   | 11.2 ms        
Uztelecom       | Tashkent, UZ (10G)        | 621 Mbits/sec   | 443 Mbits/sec   | 90.5 ms        
Clouvider       | NYC, NY, US (10G)         | 836 Mbits/sec   | 612 Mbits/sec   | 84.9 ms        
Clouvider       | Dallas, TX, US (10G)      | 805 Mbits/sec   | 430 Mbits/sec   | 121 ms         
Clouvider       | Los Angeles, CA, US (10G) | busy            | 303 Mbits/sec   | 150 ms         

iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
-----           | -----                     | ----            | ----            | ----           
Clouvider       | London, UK (10G)          | 909 Mbits/sec   | 920 Mbits/sec   | 24.7 ms        
Scaleway        | Paris, FR (10G)           | busy            | 916 Mbits/sec   | 21.8 ms        
NovoServe       | North Holland, NL (40G)   | 917 Mbits/sec   | 923 Mbits/sec   | 11.1 ms        
Uztelecom       | Tashkent, UZ (10G)        | 844 Mbits/sec   | 528 Mbits/sec   | 90.2 ms        
Clouvider       | NYC, NY, US (10G)         | 855 Mbits/sec   | 448 Mbits/sec   | 84.8 ms        
Clouvider       | Dallas, TX, US (10G)      | 789 Mbits/sec   | 442 Mbits/sec   | 121 ms         
Clouvider       | Los Angeles, CA, US (10G) | 749 Mbits/sec   | 361 Mbits/sec   | 150 ms         

Geekbench 6 Benchmark Test:
---------------------------------
Test            | Value                         
                |                               
Single Core     | 1421                          
Multi Core      | 4118                          
Full Test       | https://browser.geekbench.com/v6/cpu/5138073

YABS completed in 14 min 45 sec
root@vm1-zombie:~#
    Thanked by (1)babywhale

    I hope everyone gets the servers they want!

  • Not_OlesNot_Oles Hosting ProviderContent Writer

    @babywhale Thanks for bashvm! <3 :star: <3 :star: <3 :star: <3 :star: <3 :star:

    Over the last couple of weeks I have tried bashvm on three dedicated servers, running either Debian 12 or Ubuntu 22.04 LTS. I have tried to go through variations on the VM install procedures, such as, for example, changing, as scripted by bashvm, the source of the software installed in the VM between official distribution supplied qcow2 images and official distribution supplied ISOs. bashvm also provides, and as additional examples of my testing, I have tried to test multiple VM networks on the Node, port forwarding, and IPv6 with dhcpv6.

    As a clueless™ guy, I can say that the most basic use of bashvm, autocreated VMs made from official distribution supplied qcow2 cloud images, are pretty easy. My workflow, so far, for bashvm autocreated VMs, the simplest case, looks like this [the numbers inside brackets are bashvm menu sequences]:

    Make an Auto Cloud VM (= KVM VPS from official distro qcow2 cloud image)
  Clone bashvm
  Install bashvm with bashvm-installer
  Create an Auto Cloud Image VM -- [1,10]
  Add port forwarding -- [7]
  Add dhcpv6 (auto) to default network -- [3,8]
  Add dhcpv6 reservation -- [3,10] # Haven't tried this step yet
  Start VM [1,2], console inside [1,11], add ssh keys and 51-Not_Oles.conf, restart sshd

    Installing from official distribution supplied ISOs is a little more complicated, especially if we decide to add a different Node network. Also, VMs created from ISOs require VNC to install the VM's internal software, configure the VM's IPv6, install openssh-server, etc. It appears that bashvm might support almost any ISO, but, for example, I haven't tried any BSD ISOs as yet.

    Probably most LESbians already know @babywhale from his dedicated work on the FreeVPS project. Now, in addition to his FreeVPS work, @babywhale also has given us bashvm! Notably, bashvm is open source under the MIT license. Also, delightfully, bashvm runs over ssh, so no web framework is required -- and, accordingly, no possibility of attacks and compromises exists via a web framework which isn't there!

    During the entire time that I have known @babywhale, both in the FreeVPS context and now in the bashvm context, he always has been super friendly, super dependable, and super hard working! He always responds almost immediately to the dozens of questions I ask. He steadily and consistently improves bashvm! He is beyond awesome! @babywhale deserves a huge round of applause from everyone on the Low End! 👏👏👏👏👏 Certainly there is no doubt whatsoever that @babywhale is one of the most dedicated and one of the best contributors to our Low End community! <3

    I am cautiously optimistic that bashvm will enable MetalVPS, finally, to more fully utilize excess server capacity by enabling awesome community members to receive high quality, performant libvirt KVM VMs created on MetalVPS servers by bashvm.

    Lest anyone become too afraid, :) no, MetalVPS isn't giving up its on-the-metal mantra. But, awesome MetalVPS Neighbors ought also to have the option of running on emulated or virtual KVM metal. And bashvm <3 provides a wonderful opportunity to make emulated metal or virtual metal MetalVPSes happen safely and dependably via libvirt. More on all this before too long!

    Thanks to @babywhale for bashvm! <3

    Thanks to @crunchbits for wonderful Crunchy! <3

    Thanked by (3)babywhale AlwaysSkint Lantern1368

    I hope everyone gets the servers they want!

  • AlwaysSkintAlwaysSkint OG
    edited March 2

    Great to see a fully textual menu system: takes me back to one I created some 30 years ago. :)
    No bloat there, it seems. :+1:
    Nice one @babywhale

    Thanked by (3)Not_Oles babywhale adly

    It wisnae me! A big boy done it and ran away.
    NVMe2G for life! until death (the end is nigh)

  • Not_OlesNot_Oles Hosting ProviderContent Writer
    edited March 3

    Just for crazy fun, If someone wanted to write a front end web interface for bashvm, maybe it could use something like:

    https://bashsta.cc/

    https://github.com/cgsdev0/bash-stack

    HN discussion at https://news.ycombinator.com/item?id=37265392 includes this gorgeous tidbit:

    "Other similar projects require a CGI-capable web server. This one instead uses djb's tcpserver. Guess next step will be to drop any external dependencies."
    -- https://news.ycombinator.com/item?id=37271827

    Everyone here knows about djb, right? https://cr.yp.to

    Probably bashvm could be added to FOSSBilling? @BelleNottelling

    Or FOSSBilling could be somewhat simplified and re-implemented in bash-stack?
    Of course, SimplyFOSSBilling would use djb's qmail. And flat file databases processed with awk.
    Is it really true that Gmail started with qmail?
    Last time I looked there was a working implementation of qmail in NetBSD's pkgsrc.

    Thanked by (1)babywhale

    I hope everyone gets the servers they want!

  • babywhalebabywhale

    @yoursunny said:
    any bench?

    Hypervisor

    https://imgur.com/a/A4Gt5Kn

    VM

    https://imgur.com/a/tfWZZG1

    Thanked by (1)Not_Oles

    Get a free VPS! - freevps.org

  • Not_OlesNot_Oles Hosting ProviderContent Writer

    @babywhale continues working hard on bashvm!

    root@zombie ~/bashvm # date
Wed Mar  6 06:00:14 PM UTC 2024
root@zombie ~/bashvm # git pull
remote: Enumerating objects: 27, done.
remote: Counting objects: 100% (27/27), done.
remote: Compressing objects: 100% (23/23), done.
remote: Total 23 (delta 15), reused 0 (delta 0), pack-reused 0
Unpacking objects: 100% (23/23), 9.48 KiB | 388.00 KiB/s, done.
From https://github.com/babywhale321/bashvm
   0f14771..03ae062  main       -> origin/main
Updating 0f14771..03ae062
Fast-forward
 bashvm-cloudinit.sh       |  49 ++++++++++++++----
 bashvm-cloudinit.yaml     |  31 ------------
 bashvm-port-forwarding.sh |  10 +++-
 bashvm.sh                 | 175 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
 4 files changed, 207 insertions(+), 58 deletions(-)
 delete mode 100644 bashvm-cloudinit.yaml
root@zombie ~/bashvm #
    Thanked by (1)babywhale

    I hope everyone gets the servers they want!

  • babywhalebabywhale

    Hello Everyone!

    I Just recently added a whole bunch of things and after allot of hours of testing, I think that bashvm is in a good place right now so i thought it would be a good time to finally publish the first release!

    You can see the most recent changes at
    https://github.com/babywhale321/bashvm/releases/tag/05-28-2024

    Thanked by (4)Not_Oles sh97 daffy dev_vps

    Get a free VPS! - freevps.org

  • rcy026rcy026

    Is it really necessary to have a bunch of screenshots to show a cli application?
    Wouldn't it be much easier to just use text directly at github?

  • babywhalebabywhale

    @rcy026 said:
    Is it really necessary to have a bunch of screenshots to show a cli application?
    Wouldn't it be much easier to just use text directly at github?

    I'm not sure what you mean? The screenshots are just to show you a quick overview of the functions / capability's

    Get a free VPS! - freevps.org

  • rcy026rcy026

    @babywhale said:

    @rcy026 said:
    Is it really necessary to have a bunch of screenshots to show a cli application?
    Wouldn't it be much easier to just use text directly at github?

    I'm not sure what you mean? The screenshots are just to show you a quick overview of the functions / capability's

    Yes I understand that, but it's a text based application, why do screenshots when you could have just copied the text and pasted it into the page at github? I think github has enough formatting options to make it look good.

  • babywhalebabywhale

    @rcy026 said:

    @babywhale said:

    @rcy026 said:
    Is it really necessary to have a bunch of screenshots to show a cli application?
    Wouldn't it be much easier to just use text directly at github?

    I'm not sure what you mean? The screenshots are just to show you a quick overview of the functions / capability's

    Yes I understand that, but it's a text based application, why do screenshots when you could have just copied the text and pasted it into the page at github? I think github has enough formatting options to make it look good.

    it would lower resources for the user but i like that it shows what to actually expect from the program

    Thanked by (1)adly

    Get a free VPS! - freevps.org

Sign In or Register to comment.

© LowEndSpirit 2024

ipv6 ready