@Jab said:
Sure that your Murica banks are not in SEPA system (and SWIFT is expensive), but Revolut should work, they are even in SEPA Instant... however maybe not - you could be in some Revolut USA LTD. that it's outside SEPA system too.
Revolut gives BIC "REVOUS31" and 12-digit account number, but then it says "only SWIFT transfers are accepted" at the bottom.
ACH is free and convenient.
Every Murica bank has ACH.
You send the money before 6pm, it'll be received when the bank opens the next morning.
Why can't European banks join ACH to facilitate cross-Atlantic commerce?
@yoursunny said: Revolut gives BIC "REVOUS31" and 12-digit account number, but then it says "only SWIFT transfers are accepted" at the bottom.
Then yeah, your are on some USA branch of Revolut and no SEPA for ya.
SWIFT is bad/expensive [aka 0,35% fee... but not less than 6€ for my bank for single transfer] so I am not shocked that mxmla don't want to send it and to add insult to injury it's half of the cost - sender pays half [up front], receiver pays half too [substracted from the amount you got] . Plus additional fees if bank accounts in wrong currency, lol.
@yoursunny said:
Why can't European banks join ACH to facilitate cross-Atlantic commerce?
Because ACH is used to make payments within the U.S. European banks can't do anything here.
SEPA is the European Union's equivalent of ACH payments
That’s despite a Feb. 22 notice tucked away on the Fed’s website that said “after thorough consideration and evaluation, Federal Reserve Financial Services has determined that FedGlobal ACH Payments service to Canada and Europe will be discontinued in the coming months.”
"A single swap file or partition may be up to 128 MB in size. [...] [I]f you need 256 MB of swap, you can create two 128-MB swap partitions." (M. Welsh & L. Kaufman, Running Linux, 2e, 1996, p. 49)
"A single swap file or partition may be up to 128 MB in size. [...] [I]f you need 256 MB of swap, you can create two 128-MB swap partitions." (M. Welsh & L. Kaufman, Running Linux, 2e, 1996, p. 49)
If I may ask: do you block port 25 on these plans?
If not, can rDNS be set?
Thanks for your question! We do block Mail Ports by default but Clients can delete the Firewall Rule blocking the Mail Ports via Client Area. rDNS is managed for the IPv4 address and the first IPv6 address from the /64 Subnet via Client Area as well
really strange, the sf4.eygelshovennl.com is 31.41.249.108 and this is where all my incoming data is coming from anohter server-factory IP address. so there is a leak in the network somewhere if I am able to capture this
Looks like BGP session creation is unavailable at the moment.
We trust ServerFactory would get it fixed in a few weeks, instead of certain provider throwing the rug.
Hi push-up specialist!
Thanks for your request.
We face a BGP Prefix Filter Bug at the moment and are in contact with the software supplier of our Routers to fix this.
I will let the Ticket open and come back to you as soon as we have more information.
Looks better now but still not fully functional for me: I receive routes with a link-local next-hop address. That address becomes unreachable after a minute or so after the BGP session is established. I could overwrite the next-hop but that's likely not how it is supposed to work.
2001:44b8:30b7::/48 via fe80::225:90ff:fee1:6aea dev eth0 proto bgp src 2a0f:ca81:133b::1 metric 20 pref medium
2001:44b8:30b8::/48 via fe80::225:90ff:fee1:6aea dev eth0 proto bgp src 2a0f:ca81:133b::1 metric 20 pref medium
2001:44b8:30b9::/48 via fe80::225:90ff:fee1:6aea dev eth0 proto bgp src 2a0f:ca81:133b::1 metric 20 pref medium
2001:44b8:30ba::/48 via fe80::225:90ff:fee1:6aea dev eth0 proto bgp src 2a0f:ca81:133b::1 metric 20 pref medium
2001:44b8:30bb::/48 via fe80::225:90ff:fee1:6aea dev eth0 proto bg^C
[root@gw-eyg ~]# ping6 fe80::225:90ff:fee1:6aea%eth0
PING fe80::225:90ff:fee1:6aea%eth0(fe80::225:90ff:fee1:6aea%eth0) 56 data bytes
From fe80::443:7aff:fe1f:eb39%eth0 icmp_seq=1 Destination unreachable: Address unreachable
From fe80::443:7aff:fe1f:eb39%eth0 icmp_seq=2 Destination unreachable: Address unreachable
From fe80::443:7aff:fe1f:eb39%eth0 icmp_seq=3 Destination unreachable: Address unreachable
From fe80::443:7aff:fe1f:eb39%eth0 icmp_seq=4 Destination unreachable: Address unreachable
^C
--- fe80::225:90ff:fee1:6aea%eth0 ping statistics ---
5 packets transmitted, 0 received, +4 errors, 100% packet loss, time 4035ms
Comments
Revolut gives BIC "REVOUS31" and 12-digit account number, but then it says "only SWIFT transfers are accepted" at the bottom.
ACH is free and convenient.
Every Murica bank has ACH.
You send the money before 6pm, it'll be received when the bank opens the next morning.
Why can't European banks join ACH to facilitate cross-Atlantic commerce?
HostBrr aff best VPS; VirmAche aff worst VPS.
Unable to push-up due to shoulder injury 😣
Then yeah, your are on some USA branch of Revolut and no SEPA for ya.
. Plus additional fees if bank accounts in wrong currency, lol.
SWIFT is bad/expensive [aka 0,35% fee... but not less than 6€ for my bank for single transfer] so I am not shocked that mxmla don't want to send it and to add insult to injury it's half of the cost - sender pays half [up front], receiver pays half too [substracted from the amount you got]
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
https://lowendspirit.com/uploads/editor/gi/ippw0lcmqowk.png
also as we derailed the topic
BUY VPS, GOOD SHIT.
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
https://lowendspirit.com/uploads/editor/gi/ippw0lcmqowk.png
Because ACH is used to make payments within the U.S. European banks can't do anything here.
SEPA is the European Union's equivalent of ACH payments
https://www.paymentsdive.com/news/Federal-Reserve-fedglobal-ach-payments-program-reduced/648181/
Get Wise and open a euro balance account.
Should be able to receive cash that way. IBAN and BIC supported.
Need afflink? PM me.
The all seeing eye sees everything...
For BGP: Legacy resources may not have RPKI (e.g., net 44), so I guess they can't be announced via server-factory?
Thanks for your question! That's correct. RPKI is mandatory.
server-factory.com
After I place the order, do I reply to the order ASN and provide the IP here?
If you want to establish a BGP Session with us please open a Ticket after your order and provide your ASN and Subnets, thanks!
server-factory.com
What are Subnets? How can I find it?
I guess we are on the wrong path here
What do you want to accomplish?
server-factory.com
he wants to give me one for free.
a vps off course
don't go that far.
Guess they just FOMO
The all seeing eye sees everything...
@mxmla
I may have missed this, but what control panel do you use?
Also, is installation from a custom ISO possible?
"A single swap file or partition may be up to 128 MB in size. [...] [I]f you need 256 MB of swap, you can create two 128-MB swap partitions." (M. Welsh & L. Kaufman, Running Linux, 2e, 1996, p. 49)
HostBill
Yes
HostBrr aff best VPS; VirmAche aff worst VPS.
Unable to push-up due to shoulder injury 😣
We accept Bitcoin and Monero now via our own BTCPay Server
server-factory.com
Congratulations, you are part of the elite group in:
Routed IPv6 Hall of Fame
Include routed IPv6, at least /64 subnet, to get listed.
HostBrr aff best VPS; VirmAche aff worst VPS.
Unable to push-up due to shoulder injury 😣
@mxmla
If I may ask: do you block port 25 on these plans?
If not, can rDNS be set?
"A single swap file or partition may be up to 128 MB in size. [...] [I]f you need 256 MB of swap, you can create two 128-MB swap partitions." (M. Welsh & L. Kaufman, Running Linux, 2e, 1996, p. 49)
Thanks for your question! We do block Mail Ports by default but Clients can delete the Firewall Rule blocking the Mail Ports via Client Area. rDNS is managed for the IPv4 address and the first IPv6 address from the /64 Subnet via Client Area as well
server-factory.com
been noticing a lot of traffic on my server, while idle, nothing installed, ~30-50GB per day, decided to do some nethogs and tcpdumps
and I am getting data from other services on the node,
all the data is coming from the following..
really strange, the
sf4.eygelshovennl.comis31.41.249.108and this is where all my incoming data is coming from anohter server-factory IP address. so there is a leak in the network somewhere if I am able to capture this@dgc1980 Thanks for reporting this. May I ask you to open a Ticket so we can check? Thanks in advance.
server-factory.com
sent ticket, I hope you can fix this issue
Looks like BGP session creation is unavailable at the moment.
We trust ServerFactory would get it fixed in a few weeks, instead of certain provider throwing the rug.
Hi push-up specialist!
Thanks for your request.
We face a BGP Prefix Filter Bug at the moment and are in contact with the software supplier of our Routers to fix this.
I will let the Ticket open and come back to you as soon as we have more information.
Kind regards,
Max
HostBrr aff best VPS; VirmAche aff worst VPS.
Unable to push-up due to shoulder injury 😣
seems I am no longer getting leaked data.
No longer discount on annual payment?
As of today, BGP session is fully working.
Primary upstream is AS60068 (CDN77), with ServerFactory ASN prepended 2x, like this:
Secondary upstream is AS44592 (Skylink) up to AS199524 (Gcore), with ServerFactory ASN prepended 4x, like this:
HostBrr aff best VPS; VirmAche aff worst VPS.
Unable to push-up due to shoulder injury 😣
Looks better now but still not fully functional for me: I receive routes with a link-local next-hop address. That address becomes unreachable after a minute or so after the BGP session is established. I could overwrite the next-hop but that's likely not how it is supposed to work.
dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/
https://server-factory-status.com
server-factory.com
I beg to differ.
Hey teamacc. You're a dick. (c) Jon Biloh, 2020.
I think you should open a ticket.
My IPv6 only don't have that many outages
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
https://lowendspirit.com/uploads/editor/gi/ippw0lcmqowk.png