server-factory.com | Sweden now live! | 50% OFF for yearly payment
Hi there!
Here we go, our new Location Sweden, Stockholm is live!
To celebrate this event all Plans are 50 % off (recurring) for yearly payment!
Plans are hosted on:
AMD EPYC™ 7452 BASE CLOCK 2.35 GHZ / BOOST CLOCK UP TO 3.35 GHZ
256 GB DDR4 3200 MHZ ECC RAM from Samsung
4x Samsung PM9A3 DATA CENTER NVME PCIe 4.0 SSD in RAID 10
10 Gbit Uplink (1 Gbit UPLINK per VPS)
The following Prices are exclusive VAT. VAT will be added during order if you are from the EU, otherwise no VAT will be added.
Sweden AMD EPYC™ IPv6 ONLY VPS
SE-AMD EPYC™ XXS IPv6 ONLY VPS 24 HOUR TRIAL: 1 (25 % limit) Core / 2 GiB RAM / 25 GiB STORAGE / 1 Gbit UPLINK / 100 GiB TRAFFIC FOR 24 HOURS / /64 IPv6 Subnet
FREE for 24 hours (ORDER HERE!)
SE-AMD EPYC™ XXS IPv6 ONLY VPS: 1 Core / 2 GiB RAM / 25 GiB STORAGE / 1 Gbit UPLINK / 4 TiB TRAFFIC PER MONTH / /64 IPv6 Subnet
1,50 € per month (ORDER HERE!) / 9,00 € per year (ORDER HERE!)
SE-AMD EPYC™ XS IPv6 ONLY VPS: 1 Core / 4 GiB RAM / 50 GiB STORAGE / 1 Gbit UPLINK / 8 TiB TRAFFIC PER MONTH / /64 IPv6 Subnet
3,00 € per month (ORDER HERE!) / 18,00 € per year (ORDER HERE!)
SE-AMD EPYC™ S IPv6 ONLY VPS: 2 Core / 8 GiB RAM / 100 GiB STORAGE / 1 Gbit UPLINK / 16 TiB TRAFFIC PER MONTH / /64 IPv6 Subnet
6,00 € per month (ORDER HERE!) / 36,00 € per year (ORDER HERE!)
SE-AMD EPYC™ M IPv6 ONLY VPS: 4 Core / 16 GiB RAM / 200 GiB STORAGE / 1 Gbit UPLINK / 32 TiB TRAFFIC PER MONTH / /64 IPv6 Subnet
72,00 € per year (ORDER HERE!)
In need of Plans with higher specs? Check out our Website!
Sweden AMD EPYC™ VPS
SE-AMD EPYC™ XXS VPS: 1 Core / 2 GiB RAM / 25 GiB STORAGE / 1 Gbit UPLINK / 4 TiB TRAFFIC PER MONTH / 1 IPv4 Address / /64 IPv6 Subnet
3,50 € per month (ORDER HERE!) / 21,00 € per year (ORDER HERE!)
SE-AMD EPYC™ XS VPS: 1 Core / 4 GiB RAM / 50 GiB STORAGE / 1 Gbit UPLINK / 8 TiB TRAFFIC PER MONTH / 1 IPv4 Address / /64 IPv6 Subnet
5,00 € per month (ORDER HERE!) / 30,00 € per year (ORDER HERE!)
SE-AMD EPYC™ S VPS: 2 Core / 8 GiB RAM / 100 GiB STORAGE / 1 Gbit UPLINK / 16 TiB TRAFFIC PER MONTH / 1 IPv4 Address / /64 IPv6 Subnet
48,00 € per year (ORDER HERE!)
In need of Plans with higher specs? Check out our Website!
General Information
No refunds!
Pay with Alipay | Bitcoin (+ other Cryptocurrencies) | Credit Card (Visa | Mastercard | American Express | UnionPay) | SEPA Bank Transfer
Debian 11 and 12 / Ubuntu 20.04 and 22.04 / AlmaLinux 8 and 9 / Rocky Linux 8 and 9 / Windows Server 2019/2022 (BYOL)
Looking Glass (IPv4: 185.153.55.9 - IPv6: 2a07:e041:1:12::1) => lg.se.server-factory.com
Owned Hardware colocated in Obe Kista Gate Data Center, Stockholm, Sweden
RIPE Member => Link
Own IPv6 Subnet => Link
Own IPv4 Subnets => Link 1
Thanks!
Kind regards,
Max from server-factory.com
Comments
pay with... paypal?! why not?
Thanks for your question. Mainly because all Chargebacks happened so far were via PayPal. We offer PayPal for anybody who paid the first invoice with another payment method. Just open a Ticket afterwards to get PayPal enabled.
server-factory.com
any special toppings for us ?
Need yabs
Want free vps ? https://microlxc.net
Paypal is a scam. Not only do they have high "fees", they also have a $20 chargeback fee that sellers need to pay for EVERY chargeback. So not only do they lose the service they provide, they lose the money paid by the buyer AS WELL AS $20 from their OWN pocket.
Paypal is great from a buyers point of view, since there is a "chance" you can get your money back, but it is also something malicious actors take advantage of by not only getting their money back, but also make the seller lose additional money.
No, I am not suggesting crypto either since that gives the seller too much control and no way for buyer to charge back.
Websites have ads, I have ad-blocker.
Recently we had the situation that a Customer opened a PayPal Case for a payment for a service he canceled himself a few weeks before with the cancelation reason "great service but don't need it at the moment". He claimed he never got the service and PayPal decided to give him his money back. We provided proof that he used the service for a full month...
server-factory.com
"Paypal is great from a buyers point of view[...]" - I am a buyer. my money is hard earned and i don't want to be ripped off either.
I do understand that point of view as well. I can offer free 24 hour trials for all plans to test.
server-factory.com
yabs for SE-AMD EPYC™ S VPS:
root@yabs:~# curl -sL yabs.sh | bash
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Yet-Another-Bench-Script
v2023-04-23
https://github.com/masonr/yet-another-bench-script
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Fri Aug 4 01:43:27 PM CEST 2023
Basic System Information:
Uptime : 0 days, 0 hours, 0 minutes
Processor : AMD EPYC 7452 32-Core Processor
CPU cores : 2 @ 2349.998 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 7.7 GiB
Swap : 0.0 KiB
Disk : 98.3 GiB
Distro : Debian GNU/Linux 12 (bookworm)
Kernel : 6.1.0-10-amd64
VM Type : KVM
IPv4/IPv6 : ✔ Online / ✔ Online
IPv6 Network Information:
ISP : Maximilian Jacobsen
ASN : AS206075 Maximilian Jacobsen
Location : Stockholm, Stockholm County (AB)
Country : Sweden
fio Disk Speed Tests (Mixed R/W 50/50):
iperf3 Network Speed Tests (IPv4):
iperf3 Network Speed Tests (IPv6):
Geekbench 6 Benchmark Test:
Test | Value
|
Single Core | 1410
Multi Core | 2576
Full Test | https://browser.geekbench.com/v6/cpu/2145884
YABS completed in 17 min 21 sec
server-factory.com
By the way, Stripe (most commonly used CC gateway) also charges a $15 USD chargeback fee. Not exclusive to PayPal.
I am a representative of Advin Servers
Congrats on the expansion - just got a 9eur v6 only VPS to experiment v6 stuff 😄
The Ultimate Speedtest Script | Get Instant Alerts on new LES/LET deals | Cheap VPS Deals | VirMach Flash Sales Notifier
FREE KVM VPS - FreeVPS.org | FREE LXC VPS - MicroLXC
Nothing stops you to issue a chargeback with your bank when using a CC either?
That said, on the few occasions I had to issue a chargeback because hosts vanished, it was pretty obvious upfront they won't gonna stick around for long. Just do your homework and you won't be ripped off. If you sign up for something too good to be true, expect it to be until proven otherwise.
Also - great to see general deployment of v6 only servers!
aha.
Would jump on this without hesitation if self-managed rDNS was possible for the /64
Nevertheless, congratulations on the launch!
Are the cpu cores fair use or dedicated?
@mxmla has always been so awesome so decided to get one for myself
9€ per year for dedicated core?
It's shared.
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
https://lowendspirit.com/uploads/editor/gi/ippw0lcmqowk.png
Is there a tutorial for ssh with ipv6?
its the same as ssh with ipv4 as long as you have ipv6 connectivity.
Just use:
ssh user@2607:f8b0:4009:816::200e
If you have SSH running on a different port, such as 1234:
ssh -p 1234 user@2607:f8b0:4009:816::200e
Or use the IPv4 ssh port assigned to you, maybe as 1122, where the server's main IPv4 address is 11.22.33.44:
ssh -p 1122 [email protected]
Websites have ads, I have ad-blocker.
You can use 50% CPU at all times. Look at their terms page.
Thanks for your question! As @Jab (Thank you!) already said correctly: CPU Cores are shared.
Thanks for your question! Were @JoeMerit (Thank you!) and @somik (Thank you!) helpful enough or do you need further information?
server-factory.com
So there is ipv4 nat?
Want free vps ? https://microlxc.net
No, the v6 only plans are just v6, no v4 NAT.
You can use cloudflare warp or v4 VXLAN tunnel for true v4 access or use a DNS64 resolver.
The Ultimate Speedtest Script | Get Instant Alerts on new LES/LET deals | Cheap VPS Deals | VirMach Flash Sales Notifier
FREE KVM VPS - FreeVPS.org | FREE LXC VPS - MicroLXC
Thanks for your question!
As @sh97 (Thank you!) mentioned, those IPv6 ONLY VPS don't have IPv4 NAT.
server-factory.com
just got a SE-AMD EPYC™ L VPS:
here is the mandatory YABS:
hope the performance does not degrade too much when I get more neighbors
diskspeed is insane!
@mxmla, can I use Putty to ssh? how?
Give this website a look: https://en-wiki.ikoula.com/en/Connect_to_a_server_in_IPv6_via_Putty
From windows 10 onwards, you can use ssh commands in command line. So just run "cmd" and start typing in your ssh commands.
Websites have ads, I have ad-blocker.