@dusst said:
don't think it's "impressive" at least because of ping time to Mumbai and Frankfurt. There are some problems in routing from that DC. And they are the same for Webhorizon server
It seems they are adding on new transit partners. If you can report with mtr I try having this fixed
crazy performance form hetzner EX44 , it is mindboggling how hetzner is able to provide the cutting edge processors at this price range while maintaining accetable customer service
@ooopooo said:
crazy performance form hetzner EX44 , it is mindboggling how hetzner is able to provide the cutting edge processors at this price range while maintaining accetable customer service
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
# Yet-Another-Bench-Script #
# v2023-02-27 #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
Fri 17 Mar 2023 01:49:46 AM CET
Basic System Information:
---------------------------------
Uptime : 0 days, 0 hours, 2 minutes
Processor : 13th Gen Intel(R) Core(TM) i5-13500
CPU cores : 20 @ 799.952 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 62.6 GiB
Swap : 32.0 GiB
Disk : 436.9 GiB
Distro : Debian GNU/Linux 11 (bullseye)
Kernel : 5.10.0-21-amd64
VM Type : NONE
Geekbench 6 Benchmark Test:
---------------------------------
Test | Value
|
Single Core | 2666
Multi Core | 12948
Full Test | https://browser.geekbench.com/v6/cpu/572030
I think this is a stupidity of YABS, but the processor speed is what the OS reports as the test is starting. If the machine is mostly idle and it has clock scaling enabled, this will report the lowest setting. It'd be better really if YABS measured this immediately after the GB6 test ran, but obviously then it'd not be possible to have it at the top.
@cybertech
As soon as I will reinstall it to Debian 11 with kernel 5.10... with 6.0 VF doesn't want to run Windows instances which are crucial for me
@lapua
Dynamic frequency, server was idling while performing YABS so it was downclocked to low frequencies. As soon as it get load, frequency goes stonks. This is normal for modern cpu's to save power
It's pretty low performance to say the least but that's what ya get for $20. On the plus side the latest install attempt of Debian 11 will stop giving the "Unexpected DP adapter" error messages every ten seconds in terminal once you log it and audio was working through HDMI on desktop.
Comments
Crunchbits 1 Core AMD Ryzen 5950X 4GB RAM - 8 USD
Android 14 | Windows 11 | Ubuntu 24.04
xTom Frankfurt 10€/y
Free NAT KVM | Free NAT LXC | Bobr
ITS WEDNESDAY MY DUDES
xTom Netherlands 10€/y
Free NAT KVM | Free NAT LXC | Bobr
ITS WEDNESDAY MY DUDES
per year?
It seems they are adding on new transit partners. If you can report with mtr I try having this fixed
https://webhorizon.net
Hostaris
Kbits?
@Hostaris
Per month.
Android 14 | Windows 11 | Ubuntu 24.04
Racknerd
crazy performance form hetzner EX44 , it is mindboggling how hetzner is able to provide the cutting edge processors at this price range while maintaining accetable customer service
Hostaris 1 Core AMD 2GB RAM - 4 GBP/month
Android 14 | Windows 11 | Ubuntu 24.04
CPU cores : 20 @ 799.952 MHz
** 422 Kbits/sec** @Hostaris
C1Vhosting 14 EUR per year
Theoretically 500mbps, seems not. Good enough for what I paid and my intended use, though.
7950X dedicated server from Active-Servers.
when will you sell vps? 🤤
I bench YABS 24/7/365 unless it's a leap year.
32 @ 400.000 MHz ?
Hybula recent free upgrade to a previous offer, $33/qtr
Went from this before upgrade (snipping out network and misc details that are the pretty much the same):
to this:
Definitely a bit of a speed increase!
I think this is a stupidity of YABS, but the processor speed is what the OS reports as the test is starting. If the machine is mostly idle and it has clock scaling enabled, this will report the lowest setting. It'd be better really if YABS measured this immediately after the GB6 test ran, but obviously then it'd not be possible to have it at the top.
AMD EPYC / NVMe / 10GBPs KVM in Frankfurt - https://v6node.com
Looking for an unbeatable AMD EPYC Baremetal Server in Frankfurt? Drop me a PM
@cybertech
As soon as I will reinstall it to Debian 11 with kernel 5.10... with 6.0 VF doesn't want to run Windows instances which are crucial for me
@lapua
Dynamic frequency, server was idling while performing YABS so it was downclocked to low frequencies. As soon as it get load, frequency goes stonks. This is normal for modern cpu's to save power
https://dttech.top - Personal Site.
HostCram 2 Core Intel 4GB RAM - 10 USD
Android 14 | Windows 11 | Ubuntu 24.04
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Yet-Another-Bench-Script
v2023-02-27
https://github.com/masonr/yet-another-bench-script
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Mon 20 Mar 2023 06:45:25 PM CET
Basic System Information:
Uptime : 2 days, 2 hours, 25 minutes
Processor : AMD Ryzen 9 7950X 16-Core Processor
CPU cores : 4 @ 4499.972 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 7.7 GiB
Swap : 0.0 KiB
Disk : 78.7 GiB
Distro : Debian GNU/Linux 11 (bullseye)
Kernel : 5.10.0-21-amd64
VM Type : KVM
Basic Network Information:
Protocol : IPv4
ISP : Zappie Host LLC
ASN : AS23470 ReliableSite.Net LLC
Host : Madcityservers LLC
Location : Piscataway, New Jersey (NJ)
Country : United States
fio Disk Speed Tests (Mixed R/W 50/50):
iperf3 Network Speed Tests (IPv4):
Geekbench 6 Benchmark Test:
Test | Value
|
Single Core | 2596
Multi Core | 7654
Full Test | https://browser.geekbench.com/v6/cpu/620201
YABS completed in 6 min 10 sec
Hostbrr.com - Cheap but powerful VPS - Instant setup
AMD 7950XD and 5950X VPS starting at only $4.99! Order now!
always freeeeeh oracle (it takes forever to geek bench 6)
I’m a simple man I see gifs, I press thanks
YABS from my Lenovo M600: https://lowendspirit.com/discussion/5484/lenovo-m600-tiny-computer-for-40-on-ebay-us-free-ship-i-bought-one#latest
It's pretty low performance to say the least but that's what ya get for $20. On the plus side the latest install attempt of Debian 11 will stop giving the "Unexpected DP adapter" error messages every ten seconds in terminal once you log it and audio was working through HDMI on desktop.